Select them with --save-type eeprom512 or eeprom8k. The part follows GBATEK's
protocol on Game Pak data bit 0: DMA3 sends one bit per halfword, '11' +
address + '0' requests a 64-bit block that reads back after four dummy bits,
and '10' + address + data + '0' writes one. A write reports busy for a nominal
108,368 cycles before the block is stored. 8 KiB parts decode the low 10
address bits. ROMs above 16 MiB map EEPROM only at 0x0dffff00..0x0dffffff.
Bits shift out only inside machine steps, so failed steps roll back. CPU
stores, byte/word accesses, CPU reads during a read-out, and malformed or
overlapping requests are diagnostics. Blocks are stored first-bit-as-MSB,
matching common .sav layouts, and work with save files and save states.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhfHfHEuzv2AUTd6erW1gU
Select it with --save-type sram (SaveDevice::Sram). The array is byte-wide,
starts erased, and repeats every 32 KiB through the 0x0e00xxxx save window.
A CPU byte store is staged and committed when its step completes, so failed
steps roll back and reads later in the step see the byte. Unlike Flash, SRAM
can be read from ROM code. Halfword/word access and DMA stay diagnostic until
the 8-bit bus behavior for those widths is verified.
SRAM shares the save-image API, host save files, and save states. Its device
code is new, so existing save states keep loading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhfHfHEuzv2AUTd6erW1gU
A core, DMA, rendering, window, or audio error returned before the save was
written, so every completed in-game save since launch was lost. The window now
writes changed bytes on that path too. The diagnostic stays the session error;
a refused or failed write is reported as output. A failed state restore leaves
save memory undefined and is never written. Terminal runs keep the strict rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhfHfHEuzv2AUTd6erW1gU
Machine::save_state and load_state encode the CPU, every RAM, and every device
through Snapshot impls into a versioned, checksummed format. Rejected loads leave
the machine unchanged. The ROM window saves to and loads from one state file
with F5 and F9.
